Table of Contents
Advertisement
WARNING
Oils/oil vapors are combustible/explosive.
Risk of fire and explosion!
• Avoid open flames, electric sparks and ignition sources.
• Do not smoke.
NOTICE
HP fuel pump not filled with engine oil.
Damage to components, major material damage!
• Ensure that th HP fuel pump is filled with engine oil before it is installed or put into operation.
NOTICE
Contamination of components.
Risk of damage to component!
• Seal off components with suitable covers.
• Check components for special cleanliness prior to installation/assembly and clean if necessary.
Preparatory steps
u
Undo nut (2) and remove oil line (1) from HP
pump.
Filling HP pump
1.
Remove union (1).
Note:
Excess engine oil runs into gear box.
2.
Use fuel suction pipe to fill HP pump with
2 liters of clean engine oil.
210 | Injection Pump / HP Pump | MS15065/01E 2019-01
Advertisement
Table of Contents
