Siemens SIMOTION D4 Series Equipment Manual page 27

Name
DP1
DP2
D4xx
Manual, 12.2004, 6AU1900-1AJ32-0BA0
Function State
Flickering red (at the same
time as other LEDs)
Red
Flashing red (15 s at 3 Hz)
PROFIBUS1 OFF
Red
Flashing green (0.5 Hz)
Green
PROFIBUS2 OFF
Red
Operator control (hardware)
3.1 Operator control and display elements
Meaning
Technology/optional objects under
license are, for example:
Position (position axis)
•
Cam (synchronous axes with
•
connected cam)
Gear (synchronous axes with
•
gearing)
Sublicensing is therefore indicated
only when no technological events that
can be acknowledged are pending.
A fault has occurred to which the user
program cannot respond.
The following actions may be required
to rectify the fault:
Power OFF/ON
•
Check the SIMOTION CF
•
New commissioning procedure
•
Replace the D4xx
•
A technological event that can be
acknowledged (alarm, message, note)
is pending. The LED switches off when
all pending acknowledgeable events
have been acknowledged.
(See SIMOTION Technology
Functions, Alarm Description)
An event has higher priority than
sublicensing.
Enables visual identification of a
control unit connected to Ethernet
(flashing DCP); the flashing is initiated
by the ES and overrides all other
pending displays for the duration.
D4xx is deenergized or parameter
assignment is missing.
DP1 is defined as the master:
At least one slave is missing.
DP1 is defined as an i-slave:
A parameter assignment master is not
present.
PROFIBUS channel is ready to
communicate; cyclic communication is
not taking place (bus status: Clear).
PROFIBUS channel is ready to
communicate; cyclic communication is
taking place (bus status: Operate).
D4xx is deenergized or parameter
assignment is missing.
DP2 is defined as the master:
At least one slave is missing.
3-3