Power Supply; Ignition Function - ADS-tec VMT9000 Series Instruction Manual

VMT9000 series − Instruction manual v1.2

5.4.1 Power supply

FE ⇨ see section 5.3.4
Pin Signal
1
IGN ⇨ see section 5.3.3
2 0 VDC
DC+ ⇨ see technical data
3
4

5.4.2 Ignition function

With the ignition function activated, the device starts as soon as the ignition is switched on. When the
ignition is switched off, the device is disabled or shuts down. The supply voltage must remain constant.
The permissible voltage at the IGN input corresponds to the supply voltage of the device.
• This function can be activated and configured in the Configuration Center.
Recommendation for use:
Generally, the autostart and ignition functions should not be used together because
these functions partly overlap.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
(The figure shows the socket
inside the device)
23