Table of Contents
Advertisement
VMT9000 series − Instruction manual v1.2
9
2 General device information
2.1 Manufacturer and contact details
The manufacturer of the device is ads-tec Industrial IT GmbH. The company is referred to in the
following as ADS-TEC.
ads-tec Industrial IT GmbH
Heinrich-Hertz-Str.1
72622 Nürtingen
Germany
Phone: +49 7022 2522-0
Email: mailbox@ads-tec.de
Web:
www.ads-tec.de
2.2 Intended use
The device is used in logistics for data collection on vehicles, e.g. on forklifts or in-house conveyor
vehicles.
A further application area is in the production environment where the device is used for stationary
visualisation, control and operating/machine data collection.
The operator alone shall be responsible for ensuring that all operator obligations are observed and for
complying with any technical or statutory amendments that may arise.
Installation, commissioning and operation may only be performed by qualified and trained personnel.
Intervention by the user is required only for performing the actions described in this document. Should
any further modifications be required, it is necessary to consult either with the manufacturer directly or
with service personnel authorised by the manufacturer.
The device must be de-energised during service work. Appropriate measures must be taken to prevent
electrostatic discharges on components.
The device is only to be assembled, installed and operated within the permissible specifications.
Use in non-specified environments is prohibited.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
Hide quick links:
Advertisement
Table of Contents
