Compliance With The Ip Protection Class - ADS-tec VMT9000 Series Instruction Manual

VMT9000 series − Instruction manual v1.2

5.3 Compliance with the IP protection class

ATTENTION
To maintain the IP protection class:
• Insert a plug in all unused bushings.
• Insert seal correctly.
• After connecting the cable lines: close service slot as described in chapter 5.5.
Example of cable routing:
Recommendation for use:
On the inner side, attach cable ties for strain relief.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
21