Mechanical Installation; Requirements - ADS-tec VMT9000 Series Instruction Manual

VMT9000 series − Instruction manual v1.2

4 Mechanical installation

• Dimensional drawings of the device: see chapter Dimensional drawings.

4.1 Requirements

Requirement regarding installation location:
ATTENTION
Damage caused by heat!
If the device is exposed to sunlight or any other light or heat source, it can overheat and suffer
damage.
• Do not expose the device to direct radiation by sunlight or any other light or heat source!
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen • Germany
16