To switch scan mode on/off:
Elcometer 205/206
1. Switch on the gauge.
2. Press UP/SCAN key to toggle the status of the
Scan mode.
The gauge will display SCAn OFF or SCAn
On depending on which mode the gauge is in.
3. Repeat step 2 to switch scan mode on or off.
7.2 DIFFERENTIAL MODE
(Elcometer 206 and 206DL only)
Your gauge includes Differential Mode which allows it to display the positive or negative difference from
an entered nominal value.
Elcometer 206DL
1. Switch on the gauge.
2. Press MODE key to activate features and
settings.
3. Press UP and DOWN arrow keys to scroll to
SCAn symbol.
The gauge will display SCAn OFF or SCAn
On depending on which mode the gauge is in.
4. Press SEND key to switch scan mode on or
off.
5. Press MODE key when finished.
R
23