Changing the operative direction
The operative direction of controls is factory-set
as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press (SEL) for 2 seconds while
pushing the VOL control.
Adjusting the balance and
You can adjust the balance and fader.
Press (SEL) repeatedly until "BAL" or
Each time you press (SEL), the item changes
LOW* t MID* t HI* t
BAL (left-right) t FAD (front-rear)
* When EQ3 is activated (page 20).
Press the volume +/– button to adjust
the selected item.
Adjust within 3 seconds after selecting the item.
Quickly attenuating the
After "ATT-ON" momentarily appears,
"ATT" appears in the display.
To restore the previous volume level, press
When the interface cable of a car telephone is
connected to the ATT lead, the unit decreases the
volume automatically when a telephone call comes in
(Telephone ATT function).