Page 1
UHB EN 1951-2 USER MANUAL 331870 Indoor module NIBE VVM S320...
Page 2
When there is new software to download, you can do it here (provided that VVM S320 is connected to myUplink). IN THE EVENT OF DISTURBANCES IN COMFORT If you experience a disturbance in comfort of any kind, there are various measures you can take yourself before contacting your installer.
The display Navigation Menu types Menu system 4 myUplink Specification Connection Range of services Mobile apps for myUplink 5 Maintenance of VVM S320 Regular checks Saving tips 6 Disturbances in comfort Info-menu Manage alarm Troubleshooting Only additional heat Contact information...
Lowest supply heating Accessories SERIAL NUMBER MUST ALWAYS BE GIVEN It is hereby certified that the installation has been carried out according to instructions in the Installer Manual from NIBE and applicable regulations. Date __________________________________________ Signature ____________________________________________________________________________ Chapter 1 | Important information...
Serial number The serial number can be found at the bottom right on VVM S320, in the display on the home screen "Product overview" and on the type plate. Caution You need the product's ((14 digit) serial number for servicing and support.
Page 7
The indoor module’s integrated charge coil is placed in the boiler section. The water in the coil heats up the surrounding domestic hot wa- ter. NIBE VVM S320 Chapter 2 | Installation function...
The status lamp You can activate the emergency mode both when VVM S320 is running and when it is switched off. The status lamp shows how well your system is operat- To activate when VVM S320 is running: press and hold ing.
FACTORY SETTING Navigation Factory set values are marked with *. VVM S320 has a touchscreen where you simply navigate Your installer may have chosen other values that suit by pressing and dragging with your finger. your system better. SELECT Most options and functions are activ- ated by lightly pressing on the display with your finger.
Set temperature Works to set temperature The drop-down menu shows the current status for VVM S320, what is in operation and what VVM S320 is Press the boards to adjust desired value. On certain doing at the moment. function pages, you use your finger to drag up or down to obtain more cards.
Info intended for installers or service engineers. My system Menu 8 - USB This menu lights up when a USB memory is connected. Connection You can update the software here, for example. NIBE VVM S320 Chapter 3 | Display unit...
• wireless network or network cable The base level allows you to monitor the system, man- age alarms and read diagrams containing information • Internet connection to which VVM S320 can be con- for the last month. nected If you want to read older information, as well as receive •...
Close the valve. Check the system pressure, top up if required. CHECK PRESSURE VVM S320 has a pressure gauge, which shows the heating system pressure. The pressure should be between 0.5 and 1.5 bar, but varies during temperature changes. If the pressure drops to 0 or rises to 2.5 bar frequently, contact your installer for troubleshooting.
• Open the thermostat valves completely (except in rooms where you want it to be cooler). The thermo- stats slow the flow in the heating system, which VVM S320 wants to compensate by increasing the temperature. It will then work harder and consume more energy.
6 Disturbances in comfort In most cases, VVM S320 notes a malfunction (a mal- Caution function can lead to disruption in comfort) and indicates Selecting "Auxiliary operation" is not the same this with alarms, and instructions for action, in the dis- play.
• There is no heating or cooling demand (accessory is water than normal. Activate "More hot water" in required for cooling). menu 2.1. – VVM S320 does not call on heating, cooling or hot • Too low or no operating prioritisation of hot water. water. – Contact your installer! •...
Tel: +46 (0)433-27 3000 kuzmin@evan.ru info@nibe.se nibe-evan.ru nibe.se SWITZERLAND NIBE Wärmetechnik c/o ait Schweiz Industriepark, CH-6246 Altishofen Tel. +41 (0)58 252 21 00 info@nibe.ch nibe.ch For countries not mentioned in this list, contact NIBE Sweden or check nibe.eu for more information.
Page 20
WS version: a1 (working edition) Publish date: 2019-12-02 09:16 This manual is a publication from NIBE Energy Systems. All product illustrations, facts and data are based on the available information at the time of the publication’s approval. NIBE Energy Systems makes reservations for any factual or printing errors in this manual.