Checking The Oil Level Using The Oil Sight Glass (Optional); Checking The Oil Level Using The Oil Dipstick (Optional) - Siemens MOTOX BA 2010 Operating Instructions Manual

Gearbox type
E38
Z38
D38
B, BA, BAS, BAT38
K, KA, KAS, KAT38
B.38
K.38
FZ.38B
FD.38B
8.2.3

Checking the oil level using the oil sight glass (optional)

If there is an oil sight glass to check the oil level
the sight glass when the oil is cool. When the oil is hot, the oil level
the sight glass. The oil level
Figure 8-4
Top up the oil level
8.2.4

Checking the oil level using the oil dipstick (optional)

To check the oil level, push the dipstick into the hole but do not screw it in.
The oil level must be between the lower and upper marks on the oil dipstick.
If you are using the electric oil level monitoring system, the oil must be level with the
upper mark on the oil dipstick.
Rectify the oil level if necessary and check it again.
BA 2010
Operating Instructions, 02/2018, A5E38093846A/RS-AC
Distance "x"
[mm]
B3 B6
43 37
93 83
89 82
B3-00 B8-00
H-01 H-02
126 74
64 35
B5-01 B5-03
H-01 H-02
126 74
66 40
137 152
110 147
①
of cold oil is below the center of the sight glass.
Oil level in the oil sight glass
①
if necessary, and check it again.
Service and maintenance
8.2 Checking and changing lubricants
B7 B8
37 31
83 83
82 82
B7-00 B6-00
H-03 H-04
30 89
21 52
B5-02 B5-00
H-03 H-04
30 89
20 54
137 137
132 132
①
, the oil must be visible in the center of
①
V5 V6
23 19
75 32
52 35
V5-00 V6-00
H-05 H6
95 112
40 46
V1-00 V3-00
H-05 H-06
95 112
45 50
87 73
110 65
is above the center of
63