Tandem Gearboxes - Intermediate Helical Gearboxes; Oil Quantities - Siemens MOTOX BA 2010 Operating Instructions Manual

Technical data

10.6 Oil quantities

10.5.6

Tandem gearboxes - Intermediate helical gearboxes

Note
In a horizontal operating position the bulging part of the housing of the 2nd gearbox
generally faces vertically downwards.
Note
Where tandem gearboxes are concerned, each individual gearbox is to be considered
separately.
Gearbox sizes 28 and 38 on the 2nd gearbox are lubricated for life.
Screw plugs are not provided.
Horizontal operating position
a
b
*
②
③
Figure 10-21 Operating position for tandem gearbox
10.6 Oil quantities
NOTICE
Incorrect oil quantities damage the gearbox
The oil quantities listed in the tables are guide values for changing the oil.
They are used, for example, for lubricant storage and procurement. The precise values
depend on the number of stages and transmission ratio of the gearbox.
Check the oil level before commissioning.
96
Main gearbox
2nd gearbox (intermediate helical gearbox)
On opposite side
2-stage gearbox
3-stage gearbox
Vertical operating position
Operating Instructions, 02/2018, A5E38093846A/RS-AC
BA 2010