Siemens MOTOX BA 2010 Operating Instructions Manual page 21

Paint system
Corrosiveness category C4 for high environmental stress
2-component epoxy zinc phosphate base
coat,
2-component polyurethane top coat
Corrosiveness category C5 for very high environmental stress
2-component epoxy zinc phosphate base
coat,
2-component polyurethane intermediate
coat,
2-component polyurethane top coat
In case of corrosiveness category C1, overpainting with a 1-component hydrosystem after
prior rubbing down is possible.
In case of corrosiveness categories C2 to C5, overpainting with 2-component polyurethane
paint, 2-component epoxide paint and 2-component acrylic paint after prior rubbing down is
possible.
BA 2010
Operating Instructions, 02/2018, A5E38093846A/RS-AC
Description
Indoor and outdoor installation
•
Chemical plants, swimming pools, wastewater
•
treatment plants, electroplating shops, and
boathouses above seawater
Industrial areas and coastal areas with moderate salt
•
levels
Resistance to greases, mineral oils, aliphatic
•
solvents, sulfuric acid (10 %), caustic soda (10 %)
Indoor and outdoor installation
•
Buildings and areas with almost constant
•
condensation and high contamination, e.g. malt
factories and aseptic areas
Industrial areas with high humidity and aggressive
•
atmosphere, coastal areas and offshore
environments with high salt levels
Resistance to greases, mineral oils, aliphatic
•
solvents, sulfuric acid (10 %), caustic soda (20 %)
Technical description
2.6 Surface treatment
19