Siemens MOTOX BA 2010 Operating Instructions Manual page 20

Technical description
2.6 Surface treatment
Paint system
Corrosiveness category C1 for normal environmental stress
1-component hydro paint, top coat
Corrosiveness category C2 for low environmental stress
2-component - polyurethane top coat
Corrosiveness category C3 for medium environmental stress
2-component epoxy zinc phosphate base
coat,
2-component polyurethane top coat
18
Description
Indoor installation
•
Heated buildings with neutral atmospheres
•
Resistance to greases and some resistance to
•
mineral oils, aliphatic solvents
Standard paint for gearbox housings made of cast
•
iron
Indoor and outdoor installation
•
Unheated buildings with condensation, production
•
areas with low humidity, e.g. warehouses and sports
facilities
Atmospheres with little contamination, mostly rural
•
areas
Resistance to greases, mineral oils and sulfuric
•
acid (10 %), caustic soda (10 %) and some
resistance to aliphatic solvents
Indoor and outdoor installation
•
Production areas with high humidity and some air
•
contamination, e.g. food production areas, dairies,
breweries and laundries
Urban and industrial atmospheres, moderate
•
contamination from sulfur dioxide, coastal areas with
low salt levels
Resistance to greases, mineral oils, aliphatic
•
solvents, sulfuric acid (10 %), caustic soda (10 %)
Operating Instructions, 02/2018, A5E38093846A/RS-AC
BA 2010