Danger due to electrostatic discharge
For paint finishes in explosion group III, the paint can be electrostatically charged as a
result of intensive dust turbulence or processes with high levels of electrostatic charging.
Risk of explosion as a result of processes with high levels of electrostatic charging
Minimize the risk of electrostatic charging by applying effective measures according to
IEC 60079-32-1.
NOTICE
Failure of the external protection
If the paint finish is damaged, the geared motor may corrode.
Do not damage the paint finish.
Note
Information about the ability to be repainted does not guarantee the quality of the paint
product supplied by your supplier.
Only the paint manufacturer is liable for the quality and compatibility.
2.6.2
Painted version
The corrosion protection system is classified according to the corrosiveness categories in
DIN EN ISO 12944-2.
Table 2- 2
Paint system
Corrosiveness category C1, unpainted for gearbox and motor housings made of aluminum
-
BA 2010
Operating Instructions, 02/2018, A5E38093846A/RS-AC
WARNING
Paint according to corrosiveness categories
Description
Indoor installation
•
Heated buildings with neutral atmospheres
•
Resistance to greases and some resistance to
•
mineral oils, aliphatic solvents
Standard
•
Technical description
2.6 Surface treatment
17