Fastening For Suspended Transport - Siemens MOTOX BA 2010 Operating Instructions Manual

3.2.2

Fastening for suspended transport

Inadequately secured gearbox or geared motors
Observe the maximum load for the transport eye
eyebolt axis
Use only the transport eye
geared motor.
Do not use the integrally cast lifting eyes
of breaking. Only use the eyebolt
or following removal.
If necessary, use additional, suitable lifting accessories for transport or during installation.
When attaching by a number of chains and ropes just two strands must be sufficient to bear
the entire load. Secure lifting accessories against slipping.
NOTICE
Do not rig eyebolts to the front threads at the shaft ends for transportation purposes
Transport eye on the bevel helical gearbox
①
②
③
④
Figure 3-1
BA 2010
Operating Instructions, 02/2018, A5E38093846A/RS-AC
WARNING
④
.
③
Integrally cast eye on the motor
Eyebolt on the motor
Transport eye on the bevel helical gearbox
Eyebolt on the gearbox
Fastening the gearbox or geared motor for suspended transport
Incoming goods, transport, and storage
③
of the bevel helical gearbox or the
④
or eyebolt of the gearbox to transport the gearbox or
①
on the motor for transport because of the risk
②
on the motor to transport the motor prior to mounting
Eyebolt on the helical gearbox, parallel shaft
gearbox, helical worm gearbox
3.2 Transport
23