Specifications; Environment; System - Mitel SX-2000 Light General Information Manual

Specifications

Environment

System

Condition
Temperature
Humidity
Vibration
(FCC Part 68, Sections 6&7)
Mechanical Stress
(FCC Part 68, Sections 6&7)
Horizontal Transportation Impact
Stress
Condition
Temperature
Humidity
Maximum Heat Dissipation - fully
loaded (see Note)
Redundant Control Cabinet
Peripheral Cabinet
DSU Cabinet
Air Flow
Storage Environment
Specification
-40º to 150ºF (-40º to 66ºC)
5-95% Relative Humidity, non-condensing
0.5 g, 5 to 100 Hz, any orthogonal axis
1.5 g, 100 to 500 Hz, any orthogonal axis
One 20.3 cm (8 inch) drop, each edge and corner adjacent to the
rest face
One shock pulse applied on each face perpendicular to the
direction of motion of the transporting vehicle; the shock pulse is
a half-sine acceleration 30 g peak, 20 ms duration
Operational Environment
Specification
39º to 120ºF (4º to 49ºC) Peripheral cabinet and DSU cabinet
32º to 104ºF (0º to 40ºC) SX-2000 Redundant Control cabinet
5-95% Relative Humidity, non-condensing
386 BTUs per hour
724 BTUs per hour
266 BTUs per hour
150 cubic feet per minute at maximum output of the fans
Specifications
Page 1 of 2
79