Installation and Configuration Manual
4.3.2
Step 2: Configure NTP and DNS Server
The procedure below configures the NTP Server IP address or FQDN and the Domain Name
System (DNS) servers.
To configure the NTP and DNS servers:
1.
Open the 'Application Settings' page (Network Settings > Application Settings).
2.
Define the NTP server's IP address so that it corresponds to your network environment.
3.
In the 'DNS Primary Server IP' and 'DNS Secondary Server IP' fields, set the primary and
secondary DNS server's IP addresses with the IP address of your DNS server.
4.
Click the Submit button to save your changes.
5.
Save the changes to flash memory, by clicking the Burn button on the toolbar. The changes
take effect after restart.
SBA for Microsoft Lync
Figure 4-8: Application Settings Page
65
4. Configuring the Enhanced Media Gateway
2
3
December 2010