Table of Contents
Advertisement
1
Important Safety Information
A. Appliance Certification
Model Santa Fe Pellet Insert
Laboratory OMNI Test Laboratories, Inc.
Report No. 061-S-77d-6.2
Solid Fuel Room Appliance/Pellet Fuel
Type
Burning Type Insert
ASTM E1509-2004, ULC S628-93
and ULC/ORD-C1482-M1990 Room
Standard
Appliance Pellet Fuel Burning Type and
(UM) 84-HUD, Mobile Home Approved
Complies with Part 15 of FCC Rules.
Operation is subject to the following
two conditions: (1) this device may not
FCC
cause harmful interference, and (2) this
device must accept any interference
received, including interference that may
cause undesired operation.
NOTE: This installation must conform with local codes. In the absence of local codes you must comply with the ASTM
E1509-2004, ULC S628-93, ULC/ORD-C-1482-M1990, (UM) 84-HUD
The Quadra-Fire Santa Fe Pellet Insert meets the U.S. Environmental Protection Agency's emission limits for pellet
This pellet insert needs periodic inspection and repair for proper operation. It is against federal regulations to operate this
pellet insert in a manner inconsistent with operating instructions in this manual.
October 23, 2018
B. BTU & Efficiency Specifications
EPA Certified Emissions: 1.8 grams per hour
*LHV Tested Efficiency: N/A
**HHV Tested Efficiency: N/A
* Weighted average LHV efficiency using data collected
during EPA emissions test.
**Weighted average HHV efficiency using data collected
during EPA emissions test.
***A range of BTU outputs based on EPA Default
Efficiency and the burn rates from the low and high EPA
tests.
****Based on the maximum feed rate per hour multiplied
by approximately 8600 BTU's which is the average BTU's
from a pound of pellets.
inserts sold after May 15, 2015.
7019-230J
SANTA FE PELLET INSERT
EPA Certification #: 940-14
***EPA BTU Output: 8,500 to 28,200 / hr.
****BTU Input: 11,600 to 38,700 / hr.
Vent Size: 3, 4 or 6 inches, "L" or "PL"
Hopper Capacity: 45 lbs.
Fuel Wood Pellets
3
Advertisement
Table of Contents
