Important Safety Information; Insert Certification; Btu & Efficiency Specifications - Quadra-Fire EXPEDITION II Installation Manual

Wood insert
Hide thumbs Also See for EXPEDITION II:
Table of Contents

Advertisement

1

Important Safety Information

A. Insert Certification
Model:
Expedition II wood Insert
Laboratory: OMNI Test Laboratories, Inc.
Safety Report No:
0061WN100S
Type:
Solid Fuel Type, Listed Room Heater
UL1482-2011 and ULC S628-93
Standard:
and (UM) 84-HUD.
This wood appliance needs periodic inspection and repair for proper operation. Consult the owner's manual for further
information. It is against federal regulations to operate this wood appliance in a manner inconsistent with the operating
instructions in the owner's manual.
NOTE: This installation must conform with local codes. In the absence of local codes you must comply with the
UL1482-2011, (UM) 84-HUD and NPFA211 in the U.S.A. and the ULC S628-93 and CAN/CSA-B365
Installation Codes in Canada. NOT APPROVED FOR MOBILE HOME INSTALLATIONS IN CANADA!
July 30, 2019
This Expedition II insert
is Certified to comply with
2020 crib wood particulate
emission standards.
Approved for ZC fireboxes.
7095-802B
B. BTU & Efficiency Specifications
Emissions Report No:
EPA Certification #: Number: 199-19
EPA Certified Emissions: 1.9 g/h
*LHV Tested Efficiency: 77.0%
**HHV Tested Efficiency: 71.3%
***EPA BTU Output: 24,700 to 26,800 / hr
****Peak BTU/Hour Output: 56,000
Vent Size: 6 inches
Firebox Size: 2.37 cubic feet
Recommended
Wood Length:
Fuel Orientation: Side-to-Side
*Weighted average LHV (Low Heating Value) efficiency
using Douglas Fir dimensional lumber and data collected
during EPA emissions test. LHV assumes the moisture
is already in a vapor state so there is no loss in energy
to vaporize.
**Weighted average HHV (High Heating Value) efficiency
using Douglas Fir dimensional lumber and data collected
during EPA emissions test. HHV includes the energy
required to vaporize the water in the fuel.
***A range of BTU outputs calculated using HHV
Efficiency and the burn rates from EPA tests, using
Douglas Fir dimensional lumber.
****A peak BTU out of the unit calculated using the
maximum first hour burn rate from the High EPA Test and
BTU content of Douglas Fir dimensional lumber (8600)
times the efficiency.
EXPEDITION II INSERT
0061WN100E
20 inches
Fuel Seasoned Cord Wood
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents