Table of Contents
Advertisement
RUN Position
In addition to the ignition switch being
turned to the ON position, the engine
start/stop switch must be in the RUN
position for the motorcycle to operate.
START Position
The START position operates the electric
starter. For the starter to operate,
the clutch lever must be pulled to the
handlebar.
Note
Even if the clutch lever is pulled to the
handlebar, the starter will not operate
if the side stand is down and a gear is
engaged.
Hazard Warning Lights
To turn the hazard warning lights on
or off, press and release the hazard
warning light switch.
The ignition must be switched ON for
the hazard warning lights to function.
The hazard warning lights will remain on
if the ignition is switched off, until the
hazard warning light switch is pressed
again.
General Information
Left Handlebar Switches
6
1
1.
SCROLL button
2.
Horn button
3.
Turn signal switch
4.
MODE button
5.
Daytime Running Lights (DRL) switch
(if equipped)
6.
High beam button
SCROLL Button
The
SCROLL
button
operate the following functions of the
instruments:
•
Odometer functions (see page 28)
•
Trip reset (see page 30)
•
Clock reset (see page 31)
•
Traction
control
page 35).
Horn Button
When the horn button is pushed, with
the ignition switch turned on, the horn
will sound.
5
4
2
3
is
used
functions
(see
39
to
Hide quick links:
Advertisement
Chapters
Table of Contents
