Headlight; Headlight Adjustment - Triumph Thruxton TFC 2019 Owner's Handbook Manual

Caution
Covering the headlight lens during
operation with
luggage, adhesive
intended to alter

headlight

beam
headlight lens covers will cause the
headlight lens to overheat and distort,
causing irreparable damage to the
headlight assembly.
Damage caused by overheating is
not considered
defect and will not be covered under
warranty.
If the headlight must be covered
during use - such as taping of
the headlight lens required during
closed-course
headlight must be disconnected.
Headlight
The use of non-approved headlight
units may result in damage to the
headlight unit and/or motorcycle.
Use a genuine
headlight unit as specified in the
Triumph Parts Catalog.
Always have replacement headlight
units installed
Triumph dealer.
The headlight
maintenance free
headlight unit must be replaced in the
event of the failure of the headlight.
Continued
items of clothing,
tape, devices
or adjust
or non genuine
a manufacturing
conditions -
Caution
Triumph supplied
by an authorized
unit is a sealed,
LED unit.
Maintenance and Adjustment

Headlight Adjustment

the
1
1. Headlight assembly mounting bolt
To adjust the headlight beam:
• Always make sure the handlebars
are in the straight ahead position.
• Vertical adjustment of the headlight
the
beam is controlled by loosening the
headlight assembly mounting bolts
and altering the position of the
headlight assembly.
• Retighten the headlight assembly
mounting bolts after adjustment to
89 lbf in (10 Nm).
The
111