Sony HDCU4300 Operation Manual page 44

AUDIO/INTERCOM
Page name Item
Page No.
<FRONT INTERCOM> MIC/PGM
A04
I/F
INTERCOM MIC
INTERCOM MIC
TYPE
INTERCOM MIC
GAIN
SIDE TONE LEVEL
PGM MIX MODE
PGM SEL
PGM1 LEVEL
PGM2 LEVEL
Set value
(PGM ON), (MIC OFF), (MIC ON)
(PROD), (ENG), (PRIV)
DYNAMIC, ECM, CARBON
BALANCED, UNBALANCED
–6, 0, +6 dB
0 to 99, 50
OFF, INCOM+PGM, L-INCOM/R-
PGM
PGM1, PGM2, PGM1+PGM2
0 to 99, 50
0 to 99, 50
44
Description
CCU front panel MIC/PGM switch position. (Display
only)
CCU front panel INTERCOM switch position.
(Display only)
Sets the headset microphone connected to the
INTERCOM connector on the front panel.
CARBON: Carbon microphone (power supply, 20 dB
gain)
ECM: Electret condenser microphone (power supply,
40 dB gain)
DYNAMIC: Dynamic microphone (no power supply,
60 dB gain)
Sets the headset microphone connected to the
INTERCOM connector on the front panel.
BALANCED: Balanced microphone
UNBALANCED: Unbalanced microphone
Sets the microphone input gain.
Sets the side tone level.
OFF: Signals are not mixed.
INCOM+PGM: INCOM and PGM signals are mixed.
L-INCOM/R-PGM: Outputs an INCOM signal
through the left channel and a PGM signal through
the right.
Selects the PGM audio output from the FRONT
INTERCOM connector.
Sets the MIX level of PGM1.
Sets the MIX level of PGM2.