Status Display; Displaying The Status Screen; Status Display Screen - Sony HDCU4300 Operation Manual

Camera control unit networked media interface board hkcu-ip43f 12g-sdi extension kit hkcu-4002
Hide thumbs Also See for HDCU4300:
Table of Contents

Advertisement

Status Display

The CCU system status can be monitored using a video
monitor connected to the PIX connector.
For information on monitoring and changing settings, see
"Menu Settings" (page 26).

Displaying the Status Screen

The menu screen is controlled using the knob and levers in the
MENU control block on the front panel.
DISP/MENU lever
CONTROL knob
To display the status screen
Set the DISP/MENU lever to the DISP position. The most
recently viewed status screen page is displayed (when first
powered on, the camera settings page is displayed). Turning
the CONTROL knob changes the displayed page.
To exit the status screen display
In status screen display mode, set the DISP/MENU lever to
the DISP position.

Status Display Screen

The following information is displayed on the status display
screen.
• Camera settings
• System status
• Camera and unit audio status
• Camera and unit intercom status
• Warning display
Camera settings
1
2
HD C4 3 00
H J2 2e X 7. 6B
6dB N D: 1 C C: A
7
8
9
a CHU MODE indication
Displays the CHU MODE (connected camera).
b Lens file name indication
Displays the lens file name.
c F drop indication
Displayed when an F drop occurs.
d EX (lens extender) indication
Displayed during use of the lens extender.
e F-stop value indication
Displays the lens F-stop value (iris value).
f Camera auto control information area
Top: Displays the Auto Setup type and execution status.
Bottom: Displays the execution item.
g Gain value indication
Displays the video output signal gain setting value (dB).
h ND filter indication
Displays the currently selected ND filter type.
i CC filter indication
Displays the currently selected CC filter type.
j Camera microphone status indication
Displayed when the camera microphone is on.
k Shutter speed/Clear scan frequency indication
Displays the shutter speed. When ECS is on, displays the
clear scan frequency.
l Shutter/ECS indication
Displays the on/off state of the shutter/ECS.
Notes
• Items that are turned off using the <DISPLAY> page
settings of the VIDEO/MONITOR menu are not displayed.
24
3 4
5 6
* EX
F :4 .7
T A LK
1 /2 0 00 O F F
0
qa
qs

Advertisement

Table of Contents
loading

Table of Contents