Sony HDCU4300 Operation Manual page 34

SYSTEM OPERATION
Page name Item
Page No.
<RETURN> INPUT FORMAT
S06
RET1
RET2
RET3
RET4
FRAME
SYNCHRONIZER
SD-RETURN MATRIX
<CHU MODE> CHU MODE
S07
Set value
When 1.001(525) is selected for
SYSTEM: 1080/59.94P, 1080/
59.94I(PsF), 1080/23.98PsF, 720/
59.94P, 525/59.94I(PsF), NTSC
When 1.000(625) is selected for
SYSTEM: 1080/50P, 1080/
50I(PsF), 1080/24PsF, 720/50P,
625/50I(PsF), PAL
When 525/59.94I (PsF), NTSC,
625/50I (PsF), or PAL is selected,
the aspect of the input signal can
be set.
SQUEEZE, LETTER BOX(16:9),
EDGE CROP
OFF, ON
OFF, ON
HDC4300/HDC-P43, HDC(HD
CUTOUT)
34
Indication
Sets the format of the return signal to be input.
When 525/59.94I (PsF), NTSC, 625/50I (PsF) or
PAL is selected, set the aspect of the input signal.
For the return format that can be selected for each
BASE FORMAT setting, refer to "Formats settable
for RETURN FORMAT" (page 39).
Sets the frame synchronizer function for the return
signal.
Sets application of the HD matrix to the SD return
signal.
Sets the camera head to connect.
The unit starts automatically after changing the
setting. Restarting may take a few minutes due to
internal mode change.
HDC(HD CUTOUT): Select to use the cutout
function.