AUDIO/INTERCOM menu
AUDIO/INTERCOM
Page name
Item
Page No.
<MIC GAIN>
CAM MIC GAIN
A01
<AUDIO OUT>
DELAY
A02
ANALOG OUT
CH1 LEVEL
CH2 LEVEL
<INTERCOM>
INTERCOM CH
A03
PRODUCER I/F
ENGINEER I/F
PGM1 INPUT
PGM2 INPUT
Set value
CH1
(---), 20, 30, 40, 50, 60 dB
CH2
(---), 20, 30, 40, 50, 60 dB
0, 5, 11, 16, 21, 27, 32, 37, 43, 48,
53, 59, 64, 69, 75, 80 ms
MIC1/2, AES/EBU
–20, 0, +4 dBu
ADJUST
–99 to 99 0
–20, 0, +4 dBu
ADJUST
–99 to 99 0
1CH(PROD), 2CH(PROD&ENG)
CLEAR COM, 4WIRE, RTS
SIDETONE
–99 to 99 0
CANCEL
TERMINATION
OFF, ON
CLEAR COM, 4WIRE, RTS
SIDETONE
–99 to 99 0
CANCEL
TERMINATION
OFF, ON
–20, 0, +4 dBu
–20, 0, +4 dBu
Description
Sets the camera microphone gain.
Sets according to the microphone used.
(---): Displayed when a camera is not connected.
(Display only)
Sets the camera microphone output phase.
Selects the MIC OUT ANALOG output.
MIC1/2: Outputs the camera MIC1/2 input from the
CCU MIC OUT connector.
AES/EBU: Outputs the camera AES/EBU input from
the CCU MIC OUT connector.
Sets the AUDIO CH1 output level.
Sets the AUDIO CH2 output level.
Selects the intercom channel number to be used.
Sets the producer line intercom system.
Sets the side tone cancel level. (Setting is possible
when CLEAR COM or RTS)
Sets termination resistance (200 ohms). (Setting is
possible when CLEAR COM or RTS)
OFF: Displayed when 4WIRE is selected in
SYSTEM I/F. (Display only)
Sets the engineer line intercom system.
Sets the side tone cancel level. (Setting is possible
when CLEAR COM or RTS)
Sets termination resistance (200 ohms). (Setting is
possible when CLEAR COM or RTS)
OFF: Displayed when 4WIRE is selected in
SYSTEM I/F. (Display only)
Sets the PGM1 input level.
Sets the PGM2 input level.
43