Overview - Sony HDCU4300 Operation Manual

Overview

The HDCU4300 Camera Control Unit connects to a HDC4300
Color Camera or HDC-P43 Multi Purpose Camera
optical fiber cable, and carries out the processing of video
signals from the camera and provides an interface with
external equipment.
Connecting a camera facilitates 4K video shooting or HD high
frame rate video shooting. HD normal speed video and SD
normal speed video can even be simultaneously output when
4K video shooting and HD high frame rate video shooting.
The unit can output video signals and audio signals as IP
signals by installing an HKCU-IP43F Networked Media
2)
Interface Board.
12G-SDI output or 6G-SDI output is also supported by
installing an HKCU-4002 12G-SDI Extension Kit in the unit.
1) To connect to the HDC-P43, an HKCU-SM100 CCU Extension
Adaptor and a single-mode fiber cable are required.
2) An SFP+ module is required to use IP output.
This unit may be combined with an MSU-1000 series Master
Setup Unit (optional) or an RCP-1000 series Remote Control
Panel (optional) to form a camera control system. This
enables you to configure a system capable of controlling
multiple video cameras.
Notes
• Before operating the system, check that the software and
ROM versions of each of this unit, HDC4300, HDC-P43,
MSU-1000 series, and RCP-1000 series are supported.
• An HKCU-IP43F Networked Media Interface Board and an
HKCU-4002 12G-SDI Extension Kit cannot be installed at
the same time.
1)
with an
3