Switching The Video With A Wipe - Sony BRS-200 Operating Instructions Manual

Switching the Video with a Wipe

Basic operation of a wipe
72
Switching the Video with an Effect (Transition Effect)
3
Use the AUTO TRANS button or transition lever to execute a transition.
The program output video gradually switches to the video selected with the
NEXT select button while one video dissolves to the other.
Each time you press the AUTO TRANS button or move the transition lever,
the program output video switches to the video selected with the NEXT
select button while one video dissolves the other.
Note
You can change the transition time for executing a transition using the AUTO
TRANS button.
For details, see "Setting the Transition Time" on page 80.
The program output video is gradually wiped across the screen to reveal the next
video. You can select from among 20 wipe patterns.
The basic procedure for a wipe is as follows:
Press the WIPE button.
Turn the F3 control to select a wipe pattern.
Select the video to be output next with the NEXT select buttons.
Execute the transition.