Table of Contents
Advertisement
To recall the registered settings
98
Storing the Settings of a Wipe, PIP, and Setting Menu Items
If "DIRECT" is not displayed, press the F3 control to display it.
4
Turn the F3 control to display "SS" (snapshot), "Wipe," or "PIP" under
"DIRECT" according to the setting you wish to store.
"SNAP:," "WIPE:," or "PIP:" is displayed at the bottom left of the display
panel.
Example of a wipe:
SW MODE
MV TYPE
WIPE:
4
5
Check that the DIRECT RECALL button is not lit.
If the DIRECT RECALL button is lit, press the button to make it go dark.
6
Press numeric buttons 0 to 9 to enter a register number.
To store in a snapshot register, enter a snapshot number between 0 and 99.
To store a wipe pattern or the settings of PIP video, enter a direct wipe
number 0 to 9 or a direct PIP number 0 to 9.
The selected number appears and flashes next to "SNAP:," "WIPE:," or
"PIP:" at the bottom left of the display panel.
SW MODE
MV TYPE
WIPE: 1
4
Flashing
7
Hold the PRESET button pressed.
The indication "Storing Preset Data." appears at the bottom left of the
display panel, and the setting is stored.
1
Check that the SW mode button is lit.
If the SW mode button is not lit, press to light up the button to set the
switcher to SW mode.
2
Check that "DIRECT" is displayed on the display panel above the F3
control.
If "DIRECT" is not displayed, press the F3 control to display it.
3
Turn the F3 control to display "SS," "Wipe," or "PIP" under "DIRECT"
according to the setting you wish to recall.
"SNAP:," "WIPE:," or "PIP:" is displayed at the bottom left of the display
panel.
4
Check that the DIRECT RECALL button is not lit.
If the DIRECT RECALL button is lit, press the button to make it go dark.
5
Press numeric buttons 0 to 9 to enter the register number in which the setting
you wish to recall is stored.
XPT HOLD
DIRECT
ME AUTO
Off
Wipe
XPT HOLD
DIRECT
ME AUTO
Off
Wipe
30
30
Advertisement
Table of Contents
