Connecting A Monitor Or Projector Equipped With A Dvi Input; Connecting A Computer For Storing The Setting Data - Sony BRS-200 Operating Instructions Manual

Connecting a Monitor or Projector Equipped with a DVI Input

Connecting a Computer for Storing the Setting Data

38
Connecting External Equipment
You can monitor an image by connecting a computer display or projector
equipped with a DVI input to the DVI-I OUT connector on the switcher.
Installing the optional BRSA-20DD2 DVI output board to the OUT card slot on
the switcher enables connection of two monitors equipped with DVI inputs at
the same time.
BRSA-20DD2 DVI output board (not supplied)
IN1 IN2
1 2 3 4 PGM1 PGM2
SDI IN SDI OUT
Projector, etc. equipped
with DVI input
Connect the LAN (10/100) connector on the switcher to a computer's LAN
connector with a cross-type LAN cable.
You can store the data such as snapshot, camera position and frame memory
image, set by the switcher in the connected computer, or import the data stored
in the computer to restore the previous status of the switcher.
IN1 5 6 7 8 IN2
SDI IN
1 2 3 4 PGM1 PGM2
SDI IN SDI OUT
* Some computers can be connected with a straight type LAN cable.
OUT
DVI-I OUT
AUX1 AUX2 GPI I/O PANEL LAN(10/100) REMOTE REF IN
GENLOCK
DVI-I OUT
Computer display, etc.
equipped with DVI input
OUT
DVI-I IN
GPI I/O PANEL LAN(10/100) REMOTE
AUX1 AUX2 REF IN
GENLOCK
LAN (10/100)
LAN cable (cross cable
Computer
~
AC IN
DVI-I OUT
RS-232C
REF OUT
RS-422
VISCA
DVI-I OUT
+
–
+
–
+
–
+
–
+
–
+
–
~
AC IN
DVI-I OUT
RS-232C
REF OUT
RS-422
VISCA
*
)