Interface Shoe of the camera.
1. Turn the lock lever to "RELEASE" while pressing the release button (A) on the
lever.
2. Firmly insert the Multi Interface foot all the way into the Multi Interface Shoe of the
camera in the direction of the arrow.
3. Firmly turn the lock lever to "LOCK" to secure the product.
3. Set the power switch to "ON."
To remove the product from the camera
Turn off the power of the product and perform Step 2-1 to remove the product.
When you are not using the product or you are using the product alone held in your hand,
reattach the cap to the Multi Interface foot.
[7] Preparations
Pairing with a Wireless Radio Receiver
To shoot images with wireless flash shooting or remote release shooting using this product,
the product must be paired with a Wireless Radio Receiver (sold separately).
Perform pairing within 1 m (3.3 ft.) of the Wireless Radio Receiver.
You can pair this product with up to 15 Wireless Radio Receivers.
1. Turn on the product, then select MENU button - [PAIRING] - [ADD] and press the
center button (A).
The LINK lamp on the product will flash in green and the pairing screen will appear.