Table of Contents
Advertisement
3 Cross-Point Bus Section
The cross-point bus section includes two types of cross-
point buttons, PGM select buttons and NEXT select
1
PGM
1
NEXT
a PGM (program) select buttons
The signal output from the PGM connector is called PGM
(program) output video. Use these buttons to select a
background image of the program output video.
Pressing one of PGM select buttons 1 to 12 allows you to
select the video (input video, color matte, color bars, or
frame memory video) assigned to the selected button.
b NEXT select buttons
Use these buttons to select a foreground image to be output
next to the present PGM output.
Pressing one of NEXT select buttons 1 to 12 allows you to
select the video (input video, color matte, color bars, or
frame memory video) assigned to the selected button.
For details on the cross-point buttons, see "Setting the Bus
Mode for the Cross-Point Buttons (Menu Page 943)" on
page 56.
1 PGM select buttons
2
3
4
5
6
2
3
4
5
6
2 NEXT select buttons
buttons. This section functions for modes other than SW
mode.
7
8
9
10
11
12
7
8
9
10
11
12
19
Control Panel
Advertisement
Table of Contents
