Installing The Rack Mounting Bracket Into The Switcher - Sony BRS-200 Operating Instructions Manual

Installing the Rack Mounting Bracket into the
Switcher
To install the Processor Unit in a rack, attach the supplied rack mounting
brackets on the left and right sides of the Unit.
1
Remove the four screws each from the left and right sides.
2
Attach the supplied rack mounting brackets to the left and right sides with
the removed screws.
Tighten the screws with torque of between 1.2 Nm and 1.6 Nm.
Rack mounting bracket (supplied)

Installing the Rack Mounting Bracket into the Switcher

145