Page 2
La conformité à ces directives implique la conformité aux normes européennes suivantes : • EN60950-1 : Sécurité des produits For the customers in the U.S.A. (CA-905K, BKP-9057) • EN55103-1 : Interférences électromagnétiques (émission) This equipment has been tested and found to comply with •...
Page 3
Kundendienst- oder Garantiedokumenten aufgeführten Anschriften. Pour les clients européens (CA-905F, BKP-9057) Le fabricant de ce produit est Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japon. Le représentant autorisé pour EMC et la sécurité des produits est Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Allemagne.
Table of Contents Table of contens Overview ..................... 5 Features ....................5 Studio Camera System Configuration ..........6 Location and Function of Parts ..............7 Lens Attachment Section (Front) and Connectors ....... 7 Connector Panel ................... 8 Camera-mounting Section (Inner Base) and the Optional BKP-9057 Viewfinder Saddle..............
Features Compatible with Sony specification Large -lens The unit allows you to attach Sony hanger-type large- lenses. It is compatible with both full servo-control and manual control lenses. You can also use a portable lens (with extender only). Easy to assemble and disassemble...
BVP-E30/E30P /E30WS/E30WSP Control Unit Color Video Camera CA-590/590P Camera Adaptor CCU-590/590P Camera Control Unit STUDIO ZOOM LENS TRIAX CABLE TRIAX CABLE CA-905K/905F Large Lens Adaptor BVP-E30/E30P /E30WS/E30WSP CA-590/590P Camera Color Video Camera BVF-77 7-type Adaptor monochrome viewfinder STUDIO ZOOM LENS...
8 to 15 mm should be used with the cable clamp. 9 CA (camera adaptor) cable (triax connector: Refer to System Manual for details on using the cable Kings type for the CA-905K, Fischer type for the clamp. CA-905F) Connect to the CCU connector on the camera adaptor.
Location and Function of Parts Connector Panel 1 DC IN/OUT connectors 2 Voltage selectors 3 UTILITY OUT connector For the CA-905F 4 BREAKER buttons 1 DC IN/OUT connectors 3 UTILITY OUT connector When supplying DC power to the camera adaptor, Supplies AC power.
Camera-mounting Section (Inner Base) and the Optional BKP-9057 Viewfinder Saddle 1 VF (viewfinder) connector 2 Viewfinder mount 3 Viewfinder release button q; Camera mount 4 Pan-lock lever 9 Camera mount release lever 5 VF connecting cable 8 Camera mount slide lever 7 Number holder 6 Saddle lock knob 1 VF (viewfinder) connector...
Location and Function of Parts Rear Control Panel CA-905K/905F with PinP switch sticker attached 1 POWER indicator 2 Video signal select buttons 3 H-POSI control 4 V-POSI control 5 WIDTH control 6 HEIGHT control 7 CURSOR STORE button 8 RET button...
Page 11
ON: Enters PinP mode. When neither the RET 1 or Note RET button is depressed, you can monitor the If the CURSOR ON button is not lit, the data cannot camera’s signal on the viewfinder screen and the be stored. last selected return video signal on the small picture.
Page 12
Location and Function of Parts qj MENU SELECT switch wd CENTER MARKER switch ENTER: Activates the selection made by the ON: A white cross (center marker) indicating the MENU SELECT knob. center of the viewfinder screen appears on the CANCEL: Cancels the selection made by the viewfinder screen.
Fitting the Camera, Equipment and Accessories Tripod Mounting Attaching a Large-lens for Studio Place the unit on its side on a stable stand, so that Loosen the lens lock holding knob and turn the you have a good view of the base. lens lock counterclockwise.
E30WS/E30WSP. Preparing the camera Release lever If the BKP-9057 viewfinder saddle is attached to Slide lever the CA-905K/905F, turn the saddle lock knob Height-adjusting counterclockwise to loosen it, then tilt the saddle knobs backward. Slide the slide lever to LOCK.
Page 15
Grasp the camera handle, then connect the lens to the lens mount on the camera. Camera Lens mount Camera mount If you do not use the BKP-9057, attach the BVF- 55 to the camera. Loosen the lock knobs (4) of the camera mount, then turn the height-adjusting knobs (4) toward DOWN.
Page 16
Fitting the Camera, Equipment and Accessories Attaching the camera While pushing down on the plate, slide the slide lever toward FORWARD. When attaching the camera for the first time, you will need to align the camera mount (see page 14). Slide the slide lever to LOCK.
Connect the remote cable to the remote connector Note on the rear of this unit. If, after removing the camera, the camera mounting Connect the CA cable of this unit to the CCU pin protrudes from the center of the lens attachment connector of the camera adaptor.
Fitting the Camera, Equipment and Accessories Attach the supplied V-wedge shoe attachment to To remove the viewfinder from the camera the camera adaptor and secure it with the adaptor hexagonal screws supplied with the viewfinder. Pull the lever and push the button while pulling the viewfinder toward you, as shown in the figure below.
Page 19
Removing the viewfinder Mounting wedge Panning base Projections Before detaching the viewfinder, make sure the two following conditions exist: • The lift-release knob on the viewfinder is at its lowest position. • The lock lever on the viewfinder is set all the way to Bottom of the the right.
Fitting the Camera, Equipment and Accessories Attaching the Number Plates Insert the projections on the both sides of the number plates into the notches in the holder. Number plate Number plate holder...
100 V AC operable. • DC power will not be supplied to the CA-590/590P when the external power supply unit is not connected to the DC IN connector of the CA-905K/905F. 120 V AC Supplying the AC Power Note 230 V AC...
Maintenance manual part 1 (1) Angle-adjusting plates (2) Note Always verify that the unit is operating properly Accessories available separately before use. SONY WILL NOT BE LIABLE FOR Triax cable CCT-5/10/20/50/100/150/200 (For DAMAGES OF ANY KIND INCLUDING, BUT CA-905F) NOT LIMITED TO, COMPENSATION OR...
Page 23
The material contained in this manual consists of information that is the property of Sony Corporation and is intended solely for use by the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any...
Page 24
Printed in Malaysia Sony Corporation CA-905K/905F/BKP-9057(UC/CE) 2008.02.08 1999 3-867-330-13(1)
Need help?
Do you have a question about the CA-905K and is the answer not in the manual?
Questions and answers