Table of Contents
Advertisement
To enable spotlight compensation (only for the BRC-H700, BRC-Z700 or BRC-Z330
camera)
Adjusting the White Balance
• If you press the BK LIGHT button when the spotlight compensation function
is enabled for the BRC-H700, BRC-Z700 or BRC-Z330 camera, spotlight
compensation is disabled, and backlight compensation becomes enabled.
• For the BRC-300/300P camera, the BK LIGHT button functions only when
the exposure mode is set to FULL AUTO in the camera.
If a portion of a shooting subject is illuminated, the spotlight compensation
function adjusts the exposure to a darker level.
When you press to light up the SPT LIGHT button, the spotlight compensation
function of the camera is enabled.
Pressing the SPT LIGHT button again to make it go dark disables the spotlight
compensation function.
For details on the spotlight compensation function, refer to the Operating
Instructions supplied with the camera.
Notes
• The SPT LIGHT button does not function when the exposure mode of the
camera is set to MANUAL.
• If you press the SPT LIGHT button when the backlight compensation function
is enabled, backlight compensation is disabled, and spotlight compensation
becomes enabled.
• The BRC-300/300P camera does not incorporate the spotlight compensation
function.
Display a white object under the same lighting conditions as the subject you are
shooting, and zoom it in on the screen. (You can use a white wall, etc., instead
of a white object.) Use the white object, etc. to adjust the white balance.
Press the O P AWB button. One-push white balance of the camera is
automatically adjusted.
For details on one-push white balance, refer to the Operating Instructions
supplied with the camera.
Lights up
SPT LIGHT
PVW
O P AWB
MV
Controlling the Camera
107
Advertisement
Table of Contents
