Managing Multiple Calls - Polycom Trio Series Manual

•
When the administrator enables hybrid line registration on the phone, you can choose All to
enable DND on all the registered lines.
•
If you have new messages or you have enabled call forwarding, the messages or forwarding
icon display instead of the DND icon.
Note When you set your presence status to Do Not Disturb and enable DND on your phone, a
message stating that your status is set to Do Not Disturb scrolls under the time display,
and the DND icon does not display in the status bar.
Related Topics
Audio Calls
Enable Do Not Disturb
You can enable DND to prevent your phone from ringing and to send all incoming calls directly to
voicemail. All calls you receive while DND is enabled are logged in the Recent Calls list.
Enabling DND on shared lines disables ringing only. A visual notification of the call still displays, and
you have the option to answer or ignore the call.
Procedure
•
Do one of the following:
◦
Tap DND on the Home screen, if enabled by your system administrator.
◦
Navigate to Settings > Features > Do Not Disturb, and select Enable.
Disable Do Not Disturb
You can disable DND when you are ready to resume receiving calls again.
Procedure
•
Navigate to Settings > Features > Do Not Disturb and select Disable.

Managing Multiple Calls

Managing Multiple Calls
You can manage multiple calls that are active, incoming, or held on the system.
In the Calls screen, you can view active and held calls, including conference calls. The following figure
shows an active call and a held call.
Printed from Polycom, Inc. (http://documents.polycom.com) Page 40