Polycom Trio Series Manual page 45

Merge Calls into a Conference Call
You can merge an active call and a held call to initiate a conference call.
Procedure
1 In the Calls screen, tap a held call.
2 Tap Merge.
The held call is merged with the active call and a conference call is initiated.
Add Participants to a Conference Call
You can add up to four contacts to a conference call.
Procedure
1 During a conference call, tap Add Participants.
2 Enter a contact's number or select a contact from Contacts or Recent Calls and select Dial.
The contact is added to the call after answering.
End a Conference Call
By default, when you end a conference call, your connection to the call ends and the other participants
in the conference remain in the call.
However, your system administrator can set up your phone so that all connections terminate when you
end a conference call.
Procedure
•
During a conference call, select
Hold a Conference Call
When you place a conference call on hold, you place all conference participants on hold.
Procedure
•
Select Hold.
Printed from Polycom, Inc. (http://documents.polycom.com)
Hang Up.
Page 45