Set Log Levels; Reset The Phone To Factory Defaults - Polycom Trio Series Manual

Set Log Levels

Your system administrator uses log files to understand any issues with your phone and may ask you to
set the level for log files to reduce the amount of logs produced.
Contact your system administrator before setting a log level for your phone.
Procedure
1 Navigate to Settings > Basic > Diagnostic Logs > Server Log Level.
2 Choose a log level.
Related Topics
Troubleshooting

Reset the Phone to Factory Defaults

You can access the phone reset option without the need for entering the Administrator's password.
After the administrator configures this feature on the phone, you can reset the phone to factory default
settings.
Procedure
•
Navigate to Settings > Basic > Reset to Factory.
Related Topics
Troubleshooting
Printed from Polycom, Inc. (http://documents.polycom.com) Page 104