3-Way Calling; Caller Id Function; Call Waiting Function; Adjusting Volume - UTStarcom CDM7126 User Manual

BASIC FUNCTIONS

3-WAY CALLING

With 3-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be applied for
each of the two calls.
1.
Enter a number you wish to call then press the SEND Key
2.
Once you have established the connection, enter the second
number you wish to call then press the SEND Key
3.
When you're connected to the second party, press the SEND Key
again to begin your 3-Way call.

CALLER ID FUNCTION

Identifies caller by displaying their phone number. If the caller's name and
number are already stored in your phone book, their name will appear.
This is a system dependent feature. Please contact your service provider for
details.

CALL WAITING FUNCTION

Notifies you of an incoming call when you are already on a call by sounding
a beep tone and displaying the caller's phone number.
1.
To answer another call while on the phone, press the SEND Key
This places the first call on hold. To switch back to the first caller, press
the SEND Key again.
Call Waiting is a system dependent feature. Please contact your service
Note
provider for details.
24
.
.
.
BASIC FUNCTIONS

ADJUSTING VOLUME

Adjusts the volume of the ringer, key beep and earpiece.
1.
Press the OK Key [Menu] then press
menu. Press "Sounds" then press
of the following options:
• Call Ringer: Controls the ringer volume.
• Key Tone: Controls the keypad volume.
• Speakerphone: Controls the speakerphone volume.
• Headset: Controls the earpiece volume.
• Advanced: Controls the volume for Messaging alert, Voicemail alert, Alarms, and
Power On/Off.
2.
Adjust the volume by pressing the Volume Key
Navigation Key left or right , then press Left Soft Key
[Save] to save the setting.
• To adjust earpiece volume during a call, press the Volume Key
Note
down.
• Press and hold the Volume Key
• Press and hold the Volume Key
• In idle mode, press the Volume Key
volume.
• Press and hold the key to turn Vibrate Mode on/off.
for the "Settings"
"Volume". Select one
or press the
up or
down to turn off all sounds.
up to return to normal mode.
up/down to adjust the master
25