Speed Dials - UTStarcom CDM7126 User Manual

CONTACTS
REMOVE ALL PHONE NUMBER TO GROUP
1.
Press the OK Key [Menu], then press
"Group".
2.
Select an existing group name.
3.
Press the Right Soft Key [Options], then scroll to "Remove all"
and press the OK Key .
4.
Press Left Soft Key [Done]. "Remove" will be displayed. Repeat
for each location for the Group.
ERASE GROUP
1.
Press the OK Key [Menu], then press
"Group".
2.
Select an existing group name.
3.
Select an existing group name. Only new groups you added can be
changed. The default groups Personal, Family and Business cannot
be deleted.
4.
Press the Right Soft Key [Options], then scroll to "Erase" and
press the OK Key .
5.
"Erase?" will be displayed. Select "Yes" and then press the OK Key
to erase the group.
42
"Contacts", then
"Contacts", then

SPEED DIALS

In idle mode, calls can be placed to numbers stored in speed dial by
pressing & holding the location number on the key pad. For a 2-digit
location number, press the first number, then press and hold the second
number.
Speed Dial must be activated.
Note
1.
Press the OK Key [Menu], then press
"Speed Dials".
2.
To assign a phone number to a location, select the location then
press the Left Soft Key [Assign].
"Speed dial is Empty" appears if the location is available.
Note
3.
Scroll to the contact in the list.
4.
If more than one number exists for the contact, press the Navigation
Key up or down to select the phone number for the speed dial
location. The numbers will be displayed above the contact list.
5.
Press the Left Soft Key [Assign] to set the speed dial location.
CONTACTS
"Contacts", then
43