Contacts; Making A Call Through The Contact List; One-Touch/Two-Touch Dialing; Find - UTStarcom CDM7126 User Manual

MAKING A CALL THROUGH
THE CONTACT LIST

ONE-TOUCH/TWO-TOUCH DIALING

Ideal for frequently dialed numbers, this feature allows entries in your
contact list to be dialed via the keypad with only one or two key presses.
In order for One-Touch/Two-Touch Dialing to properly work, it must be
enabled.
ONE-TOUCH DIALING
2-9: Press and hold the corresponding memory number for more than 1
second.
TWO-TOUCH DIALING
10-99: Press and the first digit and second digits of the memory number
short and long respectively.
• If no phone number is stored in the location entered, "Location is empty"
Note
will appear on the screen.
• If One Touch Dial is set to Off:
Enter the speed dial location number then press the SEND Key
• Location 1 is reserved for voicemail.
Location 2-99 are unassigned.
To assign a speed dial location, please see page 36.
36
Stores up to 500 entries, each of which can be assigned to a group.
Entries can be retrieved by name or group.
Note

FIND

Retrieves an entry by name and calls the primary number by simply
pressing the SEND Key
in your contacts list or quickly find an entry by entering a name or its
character string.
1.
Press the OK Key
2.
The list of names in your contacts is displayed alphabetically.
3.
.
Enter a name or its character string or scroll through the list by
pressing the Navigation Key up or down
4.
To edit the entry, press the Left Soft Key
Press the Right Soft Key
"Symbols", "Cancel", "Add new", "Prepend", "Edit", "Assign speed
dial" or "Erase".
5.
To show the entry details, press the OK Key
Contacts screen press the Right Soft Key
Msg.", "Prepend", "Edit", "Assign speed dial" or "Erase".
To edit the entry, press the Left Soft Key
6.
To call the selected number, press the SEND Key
You can also access Contacts menu by pressing the Right
Soft Key .
. You can review all the entries stored
[Menu], then press
"Find".
[Options] to "Abc", "ABC", "123",

CONTACTS

"Contacts", then
.
[Send Msg].
. From the View
[Options] to "Send
[Edit].
.
37