Wait/Pause Feature; 3-Way Calling - UTStarcom CDM7075 User Manual

BASIC FUNCTIONS

WAIT/PAUSE FEATURE

Pauses are used for automated systems (i.e., voice mail, calling cards).
Insert a pause after a phone number then enter another group of
numbers. The second set of numbers is dialed automatically after the
pause. This feature is useful for dialing into systems that require a code.
1.
To insert a wait/pause, enter a phone number then press
[OPTIONS]. Select either a 2-Sec Pause ("P" appears) or a Wait
("W" appears).
2.
Press

3-WAY CALLING

With 3-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be applied for
each of the two calls.
1.
Enter a number you wish to call then press
2.
Once you have established the connection, enter the second
number you wish to call then press
3.
When you're connected to the second party, press
begin your 3-Way call.
If one of the people you called hangs up during your call, you and
Note
the remaining caller stay connected.
If you initiated the call and are the first to hang up, all three callers
are disconnected.
22
to dial or press to save phone number.
.
.
again to