UTStarcom CDM7126 User Manual page 44

TOOLS
CONVERT UNIT
To access the conversion tool:
1.
Press the OK Key [Menu], then press
menu. Press "Convert Unit".
2.
Select the desired type of measurement, and then press the OK Key
.
Length / Weight / Volume / Area / Temperature / Speed
3.
To change the unit type (for example: m, cm), press the Navigation
Key left or right and use the keypad to enter the unit to
convert. If you need to change the lower unit of measure (the unit
you are converting into), press the Navigation Key down
highlight that area.
MEMORY MANAGER
Lets you quickly and easily review and manage your device memory
usage.
1.
Press the OK Key [Menu], then press
menu. Press "Memory manager".
2.
View total, used and free memory information.
86
for the "Tools"
to
for the "Tools"
CHAPTER 6
MESSAGES
This chapter addresses voicemail and text messaging.
CHAPTER 6
MESSAGES
87