UTStarcom CDM7126 User Manual page 34

SETTINGS
CHANGE LOCK CODE
Changes your 4-digit password.
1.
Press the OK Key [Menu], then press
menu. Press "Security". Enter your password.
The default Lock code is the last 4 digits of your phone number.
2.
Press "Change Lock Code".
3.
Enter your lock code.
4.
"Create your new lock code" screen appears. Enter your new lock
code.
5.
"Re-enter your new lock code" screen appears. Enter your new
lock code again.
SPECIAL NUMBER
This features allows you to set 3 phone numbers that can be called even
when the phone is locked.
1.
Press the OK Key [Menu], then press
menu. Press "Security". Enter your password.
The default Lock code is the last 4 digits of your phone number.
2.
Press "Special Number".
3.
Select a location and press the Left Soft Key
Enter the phone number and press Left Soft Key
it to that location.
66
for the "Settings"
for the "Settings"
[Edit].
[Save] to save
4.
Press the Right Soft Key [Erase] to erase the Special Number.
Select "Yes" and press the OK Key
RESTRICT
Resets setting.
1.
Press the OK Key [Menu], then press
menu. Press "Security". Enter your password.
The default Lock code is the last 4 digits of your phone number.
2.
Press "Restrict".
3.
Select "Allow All" or "Restricted All", then press the Left Soft Key
[Select] to save the setting.
ERASE
To erase all data in your phone:
1.
Press the OK Key [Menu], then press
menu. Press "Security". Enter your password.
The default Lock code is the last 4 digits of your phone number.
2.
Press "Erase".
3.
Select "Contacts", "Message", "Voice Memo" and "Downloads",
then press the OK Key .
4.
Select "Yes" and press the OK Key
SETTINGS
.
for the "Settings"
for the "Settings"
.
67