UTStarcom CDM7126 User Manual page 21

CONTACTS
SETTING A RINGER TYPE FOR A GROUP
1.
Press the OK Key [Menu], then press
"Group".
2.
Select an existing group name.
3.
Press the Right Soft Key [Options], then scroll to "Ringtone"
and press the OK Key . Select Preset Sounds or My Sounds.
Press the Navigation Key
ring, Party, Answer your phone, Siren, UT Neumonic, UT Ring or My
Sounds.
4.
Press Right Soft Key [Play] to play ringtone. Select ringtone
and press Left Soft Key [Select].
SETTING A VIBRATION TYPE FOR A GROUP
1.
Press the OK Key [Menu], then press
"Group".
2.
Select an existing group name.
3.
Press the Right Soft Key [Options], then scroll to "Vibration"
and press the OK Key . Press the Navigation Key
down to select Use phone vib. or Vibration 1 ~ Vibration 6.
4.
Press Right Soft Key [Play] to play ringtone. Select ringtone
and press Left Soft Key [Select].
40
"Contacts", then
up or down to select Use phone
"Contacts", then
up or
CONTACTS
ADD PHONE NUMBER TO GROUP
1.
Press the OK Key [Menu], then press
"Group".
2.
Select an existing group name.
3.
Press the Right Soft Key [Options], then scroll to "Add
member" and press the OK Key
alphabetical order. Select the contact you want to add by pressing
the Navigation Key up or down
check or uncheck.
4.
Press Left Soft Key [Done]. "Done" will be displayed. Repeat
for each location for the Group.
REMOVE PHONE NUMBER TO GROUP
1.
Press the OK Key [Menu], then press
"Group".
2.
Select an existing group name.
3.
Press the Right Soft Key [Options], then scroll to "Remove
member" and press the OK Key
alphabetical order. Select the contact you want to remove by
pressing the Navigation Key up or down
Key to check or uncheck.
4.
Press Left Soft Key [Done]. "Remove" will be displayed.
Repeat for each location for the Group.
"Contacts", then
. Your contact entries appear in
, then press the OK Key to
"Contacts", then
. Group entries appear in
, then press the OK
41