Wait/Pause Feature; 3-Way Calling - UTStarcom cdm7025US Manual

WAIT/PAUSE FEATURE

Pauses are used for automated systems (i.e., voice mail, calling cards).
Insert a pause after a phone number then enter another group of
numbers. The second set of numbers is dialed automatically after the
pause. This feature is useful for dialing into systems that require a code.
1.
To insert a wait/pause, enter a phone number then press
[Options]. Select either a P-Hard Pause ("P" appears) or a T-2Sec
Pause ("T" appears).
2.
Press to dial, or press
save the number.

3-WAY CALLING

With 3-Way Calling, you can talk to two people at the same time. When
using this feature, the normal airtime rates will be applied for each of
the two calls.
1.
Enter a number you wish to call then press
2.
Once you have established the connection, enter the second
number you wish to call then press
3.
When you're connected to the second party, press
begin your 3-Way call.
• If one of the people you called hangs up during your call, you and
Note
the remaining caller stay connected. If you initiated the call and
are the first to hang up, all three callers are disconnected.
BASIC FUNCTIONS
[Options], then
.
.
"Save," to
again to
23