UTStarcom CDM7126 User Manual page 37

SETTINGS
LOCATION
To set the location function:
1.
Press the Left Soft Key [Menu], then press
menu. Press "Others", then
2.
Select "Location On" or "E911 Only".
• Location On: Your location is now available to the network.
• E911 Only: Your location will be hidden from network & application except 911.
3.
Press the Left Soft Key [Select] to save the setting.
• If you have set Lock Mode for Location to "Lock", you will need
Note
to enter your location lock code before you can enter this menu.
The default value is the last 4-digits number of your the phone number.
SET MODE
To set the mode function:
1.
Press the Left Soft Key [Menu], then press
menu. Press "Others", then
2.
Select "Home Only" or "Automatic."
• Home Only: Only within your home area or home affiliated area.
• Automatic: Scan the radio channels based on the Automatic setting.
3.
Press the Left Soft Key [Select] to save the setting.
72
"Settings"
"Location".
"Settings"
"Set Mode".
VR SETTINGS
VR RESULTS
The "VR Results" option will allow you to choose if the Command
System prompts you with a list of potential matches.
1.
Press the OK Key [Menu], then press
menu. Press "VR Settings".
2.
Press "VR Results".
3.
Select "One" or "Three Best". Press Left Soft Key
save the setting.
VOICE CALIBRATION
Voice Calibration is the process of optimizing the voice recognition
software to your voice. Voice Calibration requires that you make
recordings of your voice, which are then used to customize the voice
recognition system. This will take a few minutes and you should be in a
quiet environment for optimum training.
1.
Press the OK Key [Menu], then press
menu. Press "VR Settings".
2.
Press "Voice calibration".
3.
Select "Words calibration" or "Digits calibration". You will be
prompted to speak the words listed on the screen. Say each word as
you are prompted.
MORE
for the "More"
[Select] to
for the "More"
73