Setting The Viewfinder - Sony PDW-700 Operation Manual

For details on menu operations, see "Basic
menu operations" on page 140.
2
Select the desired item, and press the
MENU knob.
You can set the following items on the
MARKER 1 and MARKER 2 pages.
MARKER 1 page
Item
MARKER
CENTER
CENTER MARK
SAFETY ZONE
SAFETY AREA
ASPECT
ASPECT SELECT
ASPECT MASK
ASPECT MASK LVL To set the mask level,
100 % MARKER
a) The ASPECT MASK setting affects the
viewfinder and LCD monitor display. In the
following cases, it also affects the VBS signal.
• When TEST OUT SELECT on the OUTPUT 1
page is set to VBS.
• When both TEST OUT SUPER on the
OUTPUT 1 page and SUPER(MARKER) on
the SUPER IMPOSE page are set to ON.
MARKER 2 page
150 Setting the Status Display on the Viewfinder Screen and the LCD Monitor
Description
To hide all markers,
set to "OFF".
To display the center
marker, set to "ON".
Selects the position of
the center marker.
To display the safety
zone, set to "ON".
Selects the safety zone
range (80%, 90%,
92.5% or 95%).
To display the aspect
marker, set to "ON".
Selects the aspect
mode (15:9/14:9/13:9/
4:3/1.85/2.35).
a) To make the areas out
of the selected aspect
marker dimmer, set to
"ON".
when the ASPECT
MASK is set to "ON".
To display the
effective pixel area,
set to "ON".
Item
USER BOX
USER BOX WIDTH
USER BOX HEIGHT Sets the height of the
USER BOX H POS
USER BOX V POS
CENTER H POS
CENTER V POS
ASPECT SAFE
ZONE
ASPECT SAFE
AREA
3
Turn the MENU knob to change the
setting, and press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.

Setting the viewfinder

You can make settings for viewfinder screen
display functions.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
Display the VF SETTING page of the
OPERATION menu on the screen, and
press the MENU knob.
For details on menu operations, see "Basic
menu operations" on page 140.
Description
Turns the display of
the box cursor on and
off.
Sets the width of the
box cursor (distance
from center to left or
right edge).
box cursor (distance
from center to top or
bottom edge).
Sets the horizontal
position of the center
of the box cursor.
Sets the vertical
position of the center
of the box cursor.
Sets the horizontal
position of the center
marker.
Sets the vertical
position of the center
marker.
Turns the display of
the aspect safety zone
on and off.
Selects the range of
the aspect safety zone
(80%/90%/92.5%/
95%).