Sony PDW-700 Operation Manual page 156

For details on menu operations, see "Basic
menu operations" on page 140.
You can assign functions by using the
following items.
Item
ASSIGN SW
<1>
ASSIGN SW
<2>
ASSIGN SW
<3>
ASSIGN SW
<4>
ASSIGN SW
<RET>
COLOR TEMP
SW
2
Select the desired switch or button, and
press the MENU knob.
A selection screen for the selected switch or
button appears. You can use these screens to
assign one of the following functions.
Functions to be assigned to the ASSIGN 1/
3/4 (push-type) switch, RET button on the
lens, or COLOR TEMP. button
Function Description
OFF Assigns no function.
FRONT Assigns the function that switches
MIC between stereo and monaural
when a stereo microphone is
connected.
PICTURE Assigns execution of recording in
CACHE picture cache mode.
SUPER Assigns the function of a switch
(VFDISP to select mixing or no mixing of
&MENU) superimposed viewfinder and
menu text data into the video
signals output from the SDI OUT
2 or TEST OUT connector, when
SDI OUT 2 SUPER or TEST
OUT SUPER on the OUTPUT 1
page of the OPERATION menu
are set to ON.
MARKER Assigns the ON/OFF function to
display all markers.
156 Adjustments and Settings From Menus
Description
Assigns the function to
ASSIGN 1 (push-type)
switch.
Assigns the function to
ASSIGN 2 (slide-type)
switch.
Assigns the function to
ASSIGN 3 (push-type)
switch.
Assigns the function to
ASSIGN 4 (push-type)
switch.
Assigning the function to
RET button on the lens.
Assigning the function to
COLOR TEMP. button.
a)
Function Description
Assigns the function to delete the
RETAKE
last recorded clip.
b)
ATW Assigns the ON/OFF function of
auto tracing white balance.
RETURN Assigns the ON/OFF function to
VIDEO display the image of the return
video signal on the viewfinder to
c)
the switch.
LENS Assigns the same function as that
RET of the RET button on the lens and
other functions to the switch.
REC Assigns the recording start/stop
SWITCH function to the switch.
TURBO Assigns the turbo gain function to
SWITCH the switch.
ZEBRA Assigns the zebra pattern display
function to the switch.
COLOR Assigns the function to switch the
TEMP white balance to 3200K.
SW
3200K
COLOR Assigns the function to switch the
TEMP white balance to 4300K.
SW
4300K
COLOR Assigns the function to switch the
TEMP white balance to 5600K.
SW
5600K
COLOR Assigns the function to switch the
TEMP white balance to 6300K.
SW
6300K
CC 5600K Applies an electrical 5600 K filter.
ZOOM When using a lens that supports
TELE/ serial communications, assign the
d) ZOOM TELE setting to ASSIGN
WIDE
3, and the WIDE setting to
ASSIGN 4.
ZOOM When using a lens that supports
WIDE/ serial communications, assign the
d) ZOOM WIDE setting to ASSIGN
TELE
3, and the TELE setting to
ASSIGN 4.
SHOT Assigns the function to record a
MARK1 SHOT MARK 1 essence mark.
SHOT Assigns the function to record a
MARK2 SHOT MARK 2 essence mark.
UA01 to Assigns the items assigned in the
ASSIGN SEL menu.
e)
UA10