Sony PDW-700 Operation Manual page 131

No. Page Item
12 CAM REC TALLY
CONFIG 1 BLINK
REC START
BEEP
SUB LCD MODE
SEL
SUB LCD TIMER 1H/3H/8H
HDSDI REMOTE
I/F
13 CAM TEST SAW
CONFIG 2 SELECT
COLOR BAR
SELECT
USER & ALL
ONLY
RM COMMON
MEMORY
RM REC START
SHT DISP MODE SEC/DEG
Settings Description
OFF/ON Turns the tally illumination control on or off in the
event of BATTERY BEFORE END/DISC
BEFORE END.
OFF/ON Turns on or off the REC START/STOP alarm
sound.
TIMER/OFF/ Sets the timecode (TC) display after poweroff as
CONT follows.
TIMER: The TC display turns off after the elapse
of the time set by the SUB LCD TIMER below.
OFF: Not displayed.
CONT: Displayed.
Sets the duration of time after which the TC display
is to be turned off after power-off, when the SUB
LCD MODE SEL item, above, is set to "TIMER"
(H: hours).
OFF/CHARA/ Selects whether to use the function that enables
G-TLY/R-TLY recording control from this unit of an external
device connected to the SDI OUT 1/2 connectors
(HDSDI output) of this unit. g) Also selects the
indication that shows whether the external device is
recording.
OFF: Do not use the remote recording control
function.
CHARA: Use the function, and indicate by the
controlling external device indicator in the
viewfinder (see page 31).
G-TLY: Use the function, and indicate by the
TALLY indicator in the viewfinder.
R-TLY: Use the function, and indicate by the REC
(recording, red tally) indicator in the
viewfinder.
Note
When R-TLY is selected, the REC indicator lights even
when the unit is not recording.
SAW/REC Selects the test signal.
ARIB/100%/ Selects the HD color bar type.
75%/SMPTE
OFF/ON Show only USER menu in the top menu.
OFF/ON Selects whether or not to share settings for when a
remote control unit is connected and when the unit
is used alone.
RM/CAM/ When an RM remote control unit is connected,
PARA selects which recording start/stop buttons are
enabled.
RM: remote control unit
CAM: camera
PARA: both
Selects shutter speed display (seconds or degrees).
Menu List 131