Color Temperature; Wireless Microphone Reception Level; Controlling External Device; Zoom Position - Sony PDW-700 Operation Manual

are being changed, during adjustment, and after
adjustment.
For details about the display item selection, see
"Selecting the display items" on page 148.
For details about setting change and adjustment
progress messages, see "Change confirmation/
adjustment progress messages" on page 149.
For details about marker display, see "Setting the
marker display" on page 149.
All items that can be displayed on the viewfinder
screen are shown below.
1 2 3 4 5
E X Z 99
H D 4 2 2 5 0 E 0 0 0 1 : 0 0 4 / 0 0 4 D C I N
13.9 K +
W H I T E : N G
L E V E L T O O H I G H
R E C 2 T C G 0 1 : 2 3 : 4 5 : 1 5
5600 L O W L I G H T
1 W:A 18 dB 1/ 2000
90qaqsqdqfqgqh qj
a Color temperature
Displays a color temperature calculated from the
gain of R and B, in the range 0.0 K to 99.9 K (in
steps of 0.1 K). The +/– signs may be displayed
depending on the OFFSET WHT setting (see
page 158).
No display: OFFSET WHT is OFF
+: The value of OFFSET WHT is greater than
3200K.
–: The value of OFFSET WHT is less than
3200K.
b Video format
Indicates the format of video being currently
played back or recorded (see page 52)
c Extender
"EX" appears when a lens extender is attached to
the camcorder.
d Zoom position
Indicates the zoom position of the zoom lens in
the range from 0 to 99.
e Clip number/number of clips
6 7 8
W 1 2 13 .4 V
1 35 30 - 125C F1.7
2
qk ql w; wa
During playback or search, indicates the total
number of clips and the number of the selected
clip.
During clip list playback, indicates the clip list
name, the total number of sub clips, and the
number of the selected sub clip.
f Wireless microphone reception level
When a UHF portable tuner is installed in the
camcorder, "W" appears together with four-
segment reception level indicators for each of the
channels (1 or 2 channels) that can be used by the
tuner. The indications are as follows.
Normal use: The number of white segments
indicates the strength of the signal level.
Muted: The number of gray segments indicates
the strength of the signal level.
Reception level over peak: "P" is displayed
instead of the indicators.
Tuner battery is low: The channel number and
indicator of the corresponding channel
1)
flash.
1) DWR-S01D only
g Power source voltage/battery
remaining capacity
When the unit is powered from a battery pack,
indicates the remaining capacity of the power
source voltage. When the unit is powered from a
battery connected to the DC IN connector or AC
adaptor attached to the battery attachment shoe,
indicates the power source voltage.
h External battery
Appears if the power is supplied from an AC
adaptor connected to the DC IN connector.
i Controlling external device
Appears when HDSDI REMOTE I/F in the CAM
CONFIG 1 page of the MAINTENANCE menu
is set to CHARA, and this unit is controlling
recoding by an external device connected to the
SDI OUT 1/2 connectors (HDSDI output).
1) SDI OUT 1 SELECT or SDI OUT 2 SELECT on the
OUTPUT 1 page of the OPERATION menu must be
set to HDSDI.
j Electric color temperature filter
Appears when the CC 5600K function is set to
ON.
k Filter
Locations and Functions of Parts and Controls
1)
1)
31